Approaching the Integer‐Charge Transfer Regime in Molecularly Doped Oligothiophenes by Efficient Decarboxylative Cross‐Coupling

A library of symmetrical linear oligothiophene was prepared employing decarboxylative cross‐coupling reaction as the key transformation. Thiophene potassium carboxylate salts were used as cross‐coupling partners without the need of co‐catalyst, base, or additives. This method demonstrates complete chemoselectivity and is a comprehensive greener approach compared to the existing methods. The modularity of this approach is demonstrated with the preparation of discreet oligothiophenes with up to 10 thiophene repeat units. Symmetrical oligothiophenes are prototypical organic semiconductors where their molecular electrical doping as a function of the chain length can be assessed spectroscopically. An oligothiophene critical length for integer charge transfer was observed to be 10 thiophene units, highlighting the potential use of discrete oligothiophenes as doped conduction or injection layers in organic electronics applications.     

Generalization of the Kelvin equation for arbitrarily curved surfaces

Capillary condensation, which takes place in confined geometries, is the first-order vapor-to-liquid phase transition and is explained by the Kelvin equation, but the equation's applicability for arbitrarily curved surface has been long debated and is severe problem. Recently, we have proposed generic dynamic equations for moving surfaces. Application of the equations to the vapor/fluid interfaces in chemical equilibrium conditions nearly trivially solves the generalization problem for the Kelvin equation. The equations are universally true for any surfaces: atomic, molecular, micro or macro scale, real or virtual, Riemannian or pseudo-Riemannian, active or passive.     

FLTD三电极场畸变气体开关寿命特性

针对设计的一种场畸变气体开关,研究中间电极材料分别为不锈钢和黄铜条件下的烧蚀特性,结合开关寿命期间静态与触发特性的变化规律,获得决定开关寿命的关键因素,为三电极场畸变气体开关的性能优化提供理论支撑。研究结果表明,采用不锈钢和黄铜作为中间电极的烧蚀区域以及表面粗糙度均随着放电次数增加而增大,黄铜电极烧蚀较为严重且表面有明显的烧蚀圆斑,不锈钢电极则具有更高的表面粗糙度,阴阳极表面烧蚀存在明显差异,随着放电次数的增加,击穿点向电极边缘区域集中,影响开关的沿面绝缘特性,是导致开关寿命终结的主要原因。     

自由活塞斯特林发动机活塞位移测量

自由活塞斯特林发动机活塞往复振动位移对研究发动机特性具有重要意义,然而该类发动机活塞位于高压封闭腔体内且结构较为紧凑,其活塞往复振动位移难于直接进行测量。加速度传感器具有尺寸小、安装方便和工作稳定等特点,提出了采用加速度传感器测量活塞位移的方法。根据加速度传感器测量位移的原理,建立了一套加速度传感器测量自由活塞斯特林发动机活塞位移的标定试验系统,以位移传感器为基准测试并分析了不同活塞振幅和不同振动频率下加速度传感器测量位移的误差大小。实验结果表明,在活塞振幅小于8 mm,振动频率大于20 Hz条件下,加速度传感器测量位移的误差小于5%。因此加速度传感器可以用于测量自由活塞斯特林发动机的活塞往复运动位移。最后成功把加速度传感器测量的自由活塞斯特林发动机活塞振动位移用于发动机循环指示功的实验研究。     

可溶性离子对煅烧烟气脱硫石膏水化的影响

本文主要研究了不同水溶性离子对煅烧烟气脱硫石膏水化过程，也就是对大块煅烧石膏向石膏转化的相变过程的影响. 研究表明，在煅烧石膏向石膏转化的相变过程中，所有的阳离子都能加速煅烧石膏的水化作用，其中Ca²⁺的加速效应最弱. 对于最终沉淀得到的晶体，除了钠离子外，晶体尺寸不受不同种类盐的影响. 而在钠离子中，可以观察到长度大于130 μm的巨型结晶. 本研究阐明了不同离子对煅烧石膏水化的影响，为原始的烟气脱硫石膏在实际应用前的预处理提供了充分的指导.     

基于石墨烯/石墨烯卷轴复合薄膜高灵敏度柔性压力传感器

一维导电材料例如纳米线，大量应用于柔性压力传感器中. 但是一维材料和基底之间接触时相互作用力较弱，使得传感器灵敏度、响应时间、和循环寿命等性能指标有待进一步提高. 针对这些问题，设计了石墨烯/石墨烯卷轴多分子层复合薄膜作为传感器导电层. 石墨烯卷轴具有一维结构，而石墨烯的二维结构可以牢固地固定卷轴，以确保高导电性复合薄膜与基底之间的粘附性，同时整体结构的导电通道得到了增加. 由于一维和二维结构的协同效应，实现了应变灵敏度系数3.5 kPa^-1、 响应时间小于50 ms、能够稳定工作1000次以上的压阻传感器.     

A periodic DFT study on adsorption of small molecules(CH4,CO,H2O,H2S,NH3)on the WO3(001) surface-supported Au

Gas molecules(such as CH4,CO,H2O,H2S,NH_3)adsorption on the pure and Au-doped WO3(001)surface have been studied by Density functional theory calculations with generalized gradient approximation.Based on the the calculation of adsorption energy,we found the most stable adsorption site for gas molecules by comparing the adsorption energies of different gas molecules on the WO3(001)surface.We have also compared the adsorption energy of five different gas molecules on the WO3(001)surface,our calculation results show that when the five kinds of gases are adsorbed on the pure WO3(001)surface,the order of the surface adsorption energy is CO>H2S>CH4>H2O>NH3.And the results show that NH3 is the most easily adsorbed gas among the other four gases adsorbed on the surface of pure WO3(001)surface.We also calculated the five different gases on the Au-doped WO3(001)surface.The order of adsorption energy was found to be different from the previous calculation:CO>CH4>H2S>H2O>NH3.These results provide a new route for the potential applications of Au-doped WO3 in gas molecules adsorption.     

Readjustment of the Bohr stopping force from energies of keV/n to a few tens of MeV/n ions in elemental targets

An analytical approach for the electronic stopping force for non-relativistic energies that has no adjustable parameters has been developed. The approach combines the Bohr model for the close collisions and the Firsov model for the distant collisions. In order to combine the two models, a probabilistic model was introduced. We have applied our model to ¹⁶O in ¹²C, ¹⁶O in ²⁷Al, ⁸⁴ Kr in ²⁷Al, ⁵Li in ¹²C, ¹²C in ¹²C, and ¹³²Xe in ¹²C systems and compared with SRIM/MSTAR software, the original Bohr model, the Firsov model and available experimental data. We have found that the calculated electronic stopping force values are in agreement with the general qualitative behaviour of the electronic stopping force as a function of particle velocity reported in the literature. The proposed analytical formula is expected to be valid for other projectile-target combinations but more experimental data are needed to verify this assumption.     

基于PdSe2/GaAs异质结的高灵敏近红外光伏型探测器的制备和图像传感的应用

本文制备了一种基于PdSe₂/GaAs异质结的高灵敏近红外光电探测器，该探测器是通过将多层PdSe₂薄膜转移到平面GaAs上制成的. 所制备的PdSe₂/GaAs异质结器件在808 nm光照下表现出明显的光伏特性，这表明近红外光电探测器可以用作自驱动器件. 进一步的器件分析表明，这种杂化异质结在零偏电压和808 nm光照下具有1.16×10⁵的高开关比. 光电探测器的响应度和比探测度分别约为171.34 mA/W和2.36×10¹¹ Jones. 而且，该器件显示出优异的稳定性和可靠的重复性. 在空气中2个月后，近红外光电探测器的光电特性几乎没有下降，这归因于PdSe₂的良好稳定性. 最后，基于PdSe₂/GaAs的异质结器件还可以用作近红外光传感器.